Pyrolysis Plant in Turkey

Pyrolysis plant in Turkey turns lots of waste into valuable pyrolysis oil. Turkey has abundant waste resources. And this situation offers a prime opportunity for recycling and resource recovery. Beston machines are designed to efficiently and environmentally process various waste materials in Turkey. Beston pyrolysis technology ensures the conversion of waste into valuable pyrolysis oil. It contributes to both environmental sustainability and resource optimization. If you are interested in joining this cooperation, see more details in the following content.

Cases of Beston Pyrolysis Plant in Turkey

Beston has successfully installed four sets of machines in Turkey. These cases show increasing awareness of waste management and resource recycling in the region. Among these installations are two sets of BLJ-6 and two sets of BLJ-16 small pyrolysis equipment. They are specifically designed for processing tyre waste. Beston Group invites you to take a closer look at some photos capturing these installations and witness the positive impact of advanced technology in action.

Waste Management Situation in Turkey

The waste management situation in Turkey presents various challenges. It requires urgent attention and effective solutions. Currently, a significant portion of waste is managed through sanitary landfilling. Sanitary landfilling is not the most sustainable option. Uncontrolled dumping accounts for a part of waste management practices. It poses significant environmental and health risks. The application of recovery methods is limited to just no more than 20% of waste. Composting, a valuable approach for organic waste, is utilized for only a little part of waste management. It is evident that a comprehensive and sustainable waste management strategy is urgently needed in Turkey to minimize pollution and preserve natural resources. Beston pyrolysis plant is such an efficient way to recycle local waste.

Waste Raw Materials for Pyrolysis in Turkey

In Turkey, there is an abundance of waste raw materials that are ideally suited for pyrolysis processes. Among these materials, the primary focus lies on three main categories: tyres, plastics, and oil sludge.

• Waste tyre: passenger car tyres, motorcycle and scooter tyres, truckand bus tyres, agricultural tyres, off-road and construction tyres, aircraft tyres, industrial and solid tyres, bike tyres, rubber-made products, etc.
• Waste plastic: High-density polyethylene (HDPE), Low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), and other plastics.
• Oil sludge: Crude oil sludge, refinery sludge, drilling mud, produced water, oil-contaminated soil, tank bottom sludge, sludge from oil-water separators, spent lubricating oil, sludge from oil refining processes, contaminated sediments, etc.
• Note: Polyethylene terephthalate (PET) and polyvinyl chloride (PVC) should not be used as primary processing materials when applying Beston machines.

Final Products and Their Uses

Product	Uses
Pyrolysis Oil	It can be fuel for industrial heating, like cement factories, boiler factories, brick factories, ceramic factories, and other factories.
	It can be used for electricity generation.
	Pyrolysis oil can be reprocessed into high-quality oil by an oil distillation machine.
Carbon Black	It is a good reinforcing agent in rubber products.
	Carbon black can be ground or processed into high-quality carbon black.
	Carbon black can be used as pigment and filler in plastics and ink/paint industries.
Syngas	Syn-gas is applied for chemical production (e.g., methanol, ammonia).
	Gasification for hydrogen and biofuel production.
Recycled Steel Wire	It is a raw material for manufacturing steel products.
	It is the reinforcement in concrete structures.
	It is used for making wire products such as fencing, mesh, cables, and springs.

What is Pyrolysis Process in Turkey?

• Feeding: The raw materials, such as waste plastic, tire, or oil sludge, are loaded into the reactor either manually or through a feeder.
• Pyrolysis: Heat the reactor. As the temperature rises, it initiates the pyrolysis process. Oil gas and liquid oil are produced in the main furnace.
• Dishcarging: The oil gas will go through a condenser and hydroseal for purification. After being purified, the oil gas is used for heating. The liquid oil will drop into a tank.
• Dedusting: The hot air within the reactor will go through various purification procedures, like ceramic ring absorption, water spray, and condensation. Final discharged smoke meets emission standards.

Parameters of Beston Pyrolysis Plant for Sale in Turkey

Model		BLJ-3	BLJ-6	BLJ-10	BLJ-16	BLL-16	BLL-30
Capacity		1-3t/d	4-6t/d	8-10t/d	12-16t/d	8t/d (only for rubber powder)	30-35t/d
Working Process		Batch	Batch	Batch	Batch	Semi-continuous	Fully continuous
Reactor Size		φ1400*4900mm	φ2200*6000mm	φ2600*6600mm	φ2800*7100mm	φ2800*7100mm	φ1800*18500mm
Reactor Material		Q245R	Q245R	Q245R	Q245R	Q245R	310S stainless steel
Drive System		350 reducer+4kw drive motor	400 reducer+5.5kw drive motor	400 reducer+5.5kw drive motor	500 reducer+7.5kw drive motor	500 reducer+7.5kw drive motor	ZQH650-50 reducer+15kw frequency conversion motor
Land (L*W*H)		18m*4.2m*6m	30m*12m*8m	30m*13m*8m	33m*13m*8m	33m*13m*8m	70m*20m*10m
Power		16.65kw	37.85kw	44.3kw	55.6kw	55.6kw	256kw
Burner		2*200,000 kcal	2*300,000 kcal	2*300,000 kcal	2*400,000 kcal	2*400,000 kcal	2.5 million kcal per set
Total Weight of Shipped Materials		About 18t	About 24.5t	About 28t	About 34.5t	About 34.5t	About 150t
Number of Containers		1*40HQ	1*40FR+1*40HQ+1*20 GP	1*40FR+2*40HQ	1*40FR+2*40HQ	1*40FR+2*40HQ	25m*8m bulk cargo+8*40HQ
Noise (dB)		≤60	≤60	≤60	≤60	≤60	≤60
Heating Materials		Fuel oil (including tyre/plastic pyrolysis oil), natural gas, LPG, diesel, etc.
Condensing System	Vertical Condenser	φ426*3000 Single piece condensing area 7.58m2	φ630*3600 Single piece condensing area 17.8m2	φ630*3600 Single piece condensing area 17.8m2	φ820*3600 Single piece condensing area 35.6m2	φ820*3600 Single piece condensing area 35.6m2	φ920*3200 2 sets of vertical condenser
	3-in-1 Condenser	3000*2200*2250 Condensing area 17.51m2	5800*2260*2500 Condensing area 35.85m2	5800*2260*2500 Condensing area 35.85m2	8000*2260*2500 Condensing area 49.5m2	8000*2260*2500 Condensing area 49.5m2

Advantages of Beston Pyrolysis Equipment for Sale in Turkey

• Beston machines have mature pyrolysis technology;
• Beston plastic pyrolysis plant is equipped with special plastic catalytic pyrolysis system;
• All of machines have high-level safety design;
• Beston offers customized pyrolysis line;
• All of machines have energy-saving designs;
• New generation of BLL-30 has large capacity and coking solution;
• Continuous type is equipped with high-automation control IOT system (Optional);

Choose Beston Group as Your Pyrolysis Plant Manufacturer in Turkey

• Top rank in export: Beston Group’s equipment holds the prestigious rank of No. 1 in China’s solid waste treatment industry when it comes to export.
• Reputation for excellence: Beston Group has earned an outstanding reputation among its long-standing customers who consistently provide positive feedback on both the equipment and the company’s exceptional services.
• Unwavering strength: With a sprawling factory area spanning approximately 20,000 square meters, Beston Group demonstrates its formidable strength as a leading player in the industry. Additionally, the spacious office area of 2401 square meters further showcases the company’s commitment to providing a conducive working environment.
• Rigorous equipment inspection: Beston Group places a paramount emphasis on quality assurance. Their equipment undergoes meticulous monitoring and inspection processes that adhere to strict standard quality control procedures.
• Expert technical solutions: Beston Group boasts a highly skilled and professional technical team, capable of offering customers comprehensive and tailored solutions. From detailed layout drawings to precise PID diagrams and installation drawings.

Join Hands with Beston Together Toward a More Sustainable Future!

The pyrolysis plant in Turkey is an ideal machine for effectively recycling waste tires, plastic, and oil sludge. When investors are seeking an environmentally friendly solution to tackle these waste materials, investing in this advanced pyrolysis plant becomes a wise choice. Beston Group stands ready to provide a comprehensive solution, along with technical support and a customized pyrolysis line tailored to the specific needs of investors. With Beston’s expertise and commitment to sustainability, investors can confidently start on their waste recycling business with a reliable and efficient pyrolysis plant.