waste plastic pyrolysis plant banner

Waste Plastic(Such As Films, Bottles, Handbags) Pyrolysis Plant

Beston waste plastic pyrolysis plant aims to convert waste plastic (such as films, bottles, handbags) into energy through waste pyrolysis technology. It means that you process the waste plastic in pyrolysis reactor under high temperature and oxygen-free condition, then you will get plastic pyrolysis oil, carbon black and combustible gas. Using the plant to recycle plastic can avoid the pollution. What’s more, this plastic recycling method is profitable, because you can make profits from the end products you get.

waste plastic pyrolysis plant
waste plastic pyrolysis plant

Applications of End Products of Plastic Pyrolysis Machine

1. Fuel oil: You can sell the plastic pyrolysis oil as fuel directly. In addition, you can transform it into gasoline or diesel by the plastic to diesel machine.

2. Carbon black: It can be used as active filler, black dyes and so on. The carbon black processing plant available can help you reprocess the carbon black into high quality.

3. Combustible gas: Most of the combustible gas is recycled to heat the reactor, which is efficient in saving the energy cost.

final products of waste plastic pyrolysis plant
final products of waste plastic pyrolysis plant

Basic Parameter of Plastic Pyrolysis Machine for Sale

Data BLJ-6 BLJ-10 BLL-16 BLL-30 BLL-40 BLL-50
Daily capacity 6 MT 10 MT 20 MT 30-50MT 40MT 50MT
Working method Batch Semi-Continuous Fully continuous
Operating pressure Constant pressure
Reactor rotate speed 0.4 turn/minute Not rotary type
Total power 24 kw/h 30 kw/h 54 kw/h 53.6kw/h 62kw 84kw
Reactor size D2.2*L 5.1m D2.8*L6.2 m D2.8 *L7.1 m L12.5*W2.2*H2.5m L12.5*W2.2*H2.5m L12.5*W2.2*H2.5m
Space for machine(L*W*H) 20*10*10 m 25*15*10 m 25*15*10 m 20*15*10m 33*15*10m 33*15*10m

Compared to the two other mode waste plastic pyrolysis plant, Beston continuous pyrolysis plant becomes more and more popular in the market because of high degree of automation and high working efficiency. The following is the continuous plastic pyrolysis process, and you can learn more about the plastic waste to oil energy conversion process.

continuous plastic pyrolysis process flowing chart
continuous plastic pyrolysis process flowing chart

Working Process of Continuous Plastic Pyrolysis Equipment

1. Dry the plastic waste if the water content is high. Then put the waste plastic into the reactor by the automatic feeding machine. And you should make sure that the reactor is left 1/3 space to smoothing rotating.

2. Heat the reactor with the coal, wood , natural gas LPG and other fuel. The oil gas will be released when the temperature reaches between 150 degrees to 200 degrees. The top output rate interval is 280 degrees to 350 degrees.

3. After high temperature pyrolysis ,the oil gas gets into the air manifold through the pipeline. The manifold can separate the light oil gas and heavy oil gas. The heavy oil gas will be liquefied and drop down into the heavy oil tank, and the light oil gas will rise up to the oil condenser to be liquefied,and then be transported to the oil storage tank.

4. The combustible gas that can not be liquefied will be transported to the hydroseal. After the desulfurization,cleaning and purification process, it will be transported directly to heat the reactor.

5. After the oil gas completely entering into the oil tank , the carbon black will be discharged automatically.

6. The exhaust gas will go through the de-dusting system before emission.

Our products are much more popular in the market thanks to the following reasons.

The Attractive Characteristics of Beston Waste Plastic Pyrolysis Plant:

1. Our plant is equipped with casing outside of reactor. Between them there are some refractory materials to prevent the reactor from burning down and prevent the heat from releasing out, thus it increases the heat utilization and prolongs the service life of the pyrolysis reactor. At the same time, insulating materials are added into the space to decrease fuel consumption, which can reduce production cost drastically.

casing of Beston waste plastic pyrolysis machine
casing of Beston waste plastic pyrolysis machine

2. New heating structure is a great innovation in the field. It combines the advantages of directly heating and hot-wind heating. So, it not only improves the heating speed, but also prolongs the reactor’s service life. Accordingly, production efficiency is enhanced and running cost is also reduced.

3. The plant does no harm to the environment. The gas produced in the working process will go through the purification system, so there is no air pollution.

4. The cost of the plastic pyrolysis plant is also affordable. The service life of our plant is longer than other plants and the it costs less to maintain the plant. In addition, you can make a lot of profits through the plant.

5. Perfect service is also a good virtue. If you have the desire to buy our plant, you can come to visit us. After buying the plant, you can enjoy the first-class after-sales service, including the aid in installing and running and the periodical call visit.

plastic pyrolysis plant in Dominica
plastic pyrolysis plant in Dominica

6. Besides, our waste plastic pyrolysis machine can also achieve waste tyre pyrolysis, oil sludge treatment, medical waste disposal and so on. But you will get different end products basing on different materials. For plastic waste, you can get fuel oil, carbon black and combustible gas. For waste tyres, the tyre pyrolysis oil, carbon black, steel wire and combustible gas are the end products. As for the oil sludge, the waste water, fuel oil and solid waste will be the end products.

We have sold our plants to Brazil, South Korea, Turkey, Hungary and so on. Recently our plastic pyrolysis plant together with the waste oil distillation plant was exported to Dominica. You can find more detailed cases here.

Request A Quote Today!

Your Name (required):

Your Email (required):

Phone:

Country:

Your Message: