Our waste plastic to fuel oil plant adopts the pyrolysis technology to achieve the plastic waste to fuel oil conversion. The conversion of waste plastic into fuel is a chemical process of breaking down large molecules of plastic into smaller molecules of oil, gas and carbon black. The following is the details about how to get fuel oil from plastic waste.
Plastic to Fuel Conversion Process
1. Put dried plastic waste into reactor and the quantity shall be controlled under 2/3 of reactor for rotating more smoothly. Then close the feeding door.
2. The plastic to fuel oil conversion includes two stages. From 100℃ to 250 ℃ is the preliminary stage. The light oil gas shall be released at 100 ℃ and fluid oil shall be released at 120℃ . From 280℃ to 350℃is the top output rate interval. Oil gas will be collected into manifold, heavy particles and oil will be gathered and liquefied in center of manifold and drop down into the heavy oil tank. The lighter gas will rise up to the multi-functional oil condensers, then be liquefied into oil and stored in the oil tank. The incondensable gas through de-sulfuration and de-dusting by hydroseal will be led to heat the furnace for reducing the energy cost.
3. Cool down the plastic pyrolysis reactor after the process. Carbon black will be discharged automatically when the temperature falls down to 50-70 degrees.
When buying a plastic to fuel oil plant, the oil yield rate is an important factor to judge whether the machine is good enough. The oil yield rate of our machine is higher than other machines. In addition, the specific oil yield rate is also different according to different kinds of plastic waste. The following chart is the details.
|Raw material||oil yield ratio|
|PP (microwave oven food box/yogurt bottles etc)||50%-75%|
|PE(plastic film /plastic wrap)||50%-75%|
|PS (smack-box/blister box)||50%-75%|
|ABS (engineering plastics)||40%|
|Leftovers of paper||Wet 15-20%, dry 60%|
|PVC (raincoat/building materials)||Not suitable|
|PET (water bottles/sodas beverage)||Not suitable|
The fuel oil from waste plastic is useful, and what you can do with the fuel oil? First, it can be sold as fuel in the market directly. Moreover, you can use our plastic to diesel machine to refine the plastic fuel oil into diesel. You can contact us to get the information about the plastic to diesel plant.
Beston plastic to fuel oil machines for sale are popular in the market, and our machines have been exported to Dominica, Brazil, Jordan and other countries. All of the customers think highly about our machine because of the following reasons:
Features of Beston Waste Plastic to Fuel Oil Plant
1. The service life of our machine is longer. The latest heating system we use can combine the advantages of the direct heating system and indirect heating system. Thus the service life of pyrolysis reactor is longer, and the heating efficiency is higher.
2. The conversion of waste plastic to fuel is environmental friendly, and the emission can reach the standard.
3. Our customers can enjoy the first-class provided by our company.
Fill in this chart and send your inquiry about Beston waste plastic to fuel oil plant here.